Turbo replecment

This post is about what you need to know when your converting the turbo from GT17 to TD04.
Turbo replacement
Convert from GT17 to the TD04HL 15T from the AERO model.
~if your converting from the GT17 to the TD04 you can use the original water line for the turbo, you just need new 2 banjo bolts and 4 washers, it's a bit tricky to fit them in place but it's possible.
If you want to make your job eaiser you can purchase a flex teflon water and oil lines for the new turbo from ebay.~

These are the washers, you need 4 of those:



This is the full kit, it will make your life easier:



The difference between the turbo's is:
1. The GT17 water lines bolts are 14'
2. The TD04 water lines bolts are 12'
3. The connection of the Oil line on the td04 is a bit upper from the the GT17.

So to get the new turbo fit right you will need:
2 bolts of 12'
4 washer's to make the bolt fit to the original water line.

Recommended: Make sure to connect all the water and oil lines before fitting the turbo in place, it will be hard to get to the bolts on the turbo when it fitted in place.

So this is basically how to fit the turbo right with the original lines.
For assembly and dissemble I attach a video from YouTube.
for any questions please contact me.

Thanks Remus Eserblom for the YouTube video.

If you have the right tools its not a hard job.

Here is some photos from the process.





Yaari.