Ticking steering wheel

If you got a ticking noise when you move your steering wheel , theres a solution.
Here is an example of the problem:

The solution is very simple, you need to clean and apply new black grease on the steering wheel joint.

1. Take the plastic cover under the steering wheel out, don't forget to disconnect the OBD connector port and the foot light cable.

the plastic is hold with 3 bolts, and the obd2 port hold with 2.

2. Make sure your steering wheel don't move during the job so your wheel alignment will stay good.

Even if it moves it's not a big deal you can adjust it later.

3. Make sure the make a sign on both sides of the Joint so you can put it back the same it was before!!~
There's only 1 Bolt on the Steering wheel joint at the bottom, after you take it out you will have to clean it with a brake cleaner.
Apply grease on the Joint at the 4 points of connection.

Put it back in places and your done.

Very simple.
Yaari.